ISI 15652 MAT Send Enquiry

General Description: Natural / Synthetic rubber based electrical mat with continuous diamond and corrugated pattern providing safe working from 415 Volt to 33000 Volt equipments. Technical mats for industrial purposes are also available. The Electrical Safety Mat offered by us can also be customized as per the specifications using superior quality material. It is available in several designs and colors for aesthetic appeal.

Comparison Chart of Electrical Insulating Mats ISI:15652 with IEC: 61111 & PVC/ POLY Floor Mats

 

S.No. Insulating Mats ISI: 15652 Insulating Mat IEC 61111 PVC/ Poly Mat
1. Elastomer 'Rubber' Elastomer 'Rubber' PVC Compound
2. Max. Thickness to Prevent Voltage Max. Thickness to Prevent Voltage Risk on Minimum Thickness.
3. Insulation Resistance with water 1600000 MΩ Insulation Resistance with water 1500000MΩ Insulation Resistance with Water 1400000MΩ
4. 100% Leakage Current proof on maximum value when measured 0.05mA 100% Leakage Current proof on maximum value when measured as per IEC Leakage Current proof on maximum value when measured 0.10mA.
5. 100% Flame Retardence extinguish with in 5 sec. after removal of blue flame. 100% Flame Retardence extinguish with in 5 sec. after removal of blue flame. Flame Retardence docs not extinguish in 5 seconds after removal of blue flame
6. 100% Absorption of moisture proof mat. 100% Absorption of moisture proof mat. Cannot say due to fix by rubber adhesive.
7. 100% Low Temperature resistance in
(-10°C)
100% Low Temperature resistance in (-10°C) Cannot say due to fix by rubber adhesive.
8. 100% Extreme Low Temp.
resistance in
(-40°C)
100% Extreme Low Temp, resistance in (-40°C) Not suitable for Extreme Low Temp, resistance.
9. Diamond aberration lo avoid slippery effects. Cloth aberration to avoid slippery effects. Cannot say due to hard PVC compound.
10. Elegant/Aesthetic Look Elegant/ Aesthetic Look Normal.
11. Tested on AC proof voltage up to 36 kV ac(rms)for 3 Minutes Tested on AC proof voltage up to 36 kV ac(rms) for 3 Minutes Tested on AC proof voltage up to 36 KV ac(rms) for 3 Minutes.
12. Embossed marking of ISI Mark, Class, CM/L No. Mfg. Identity on each meter. Embossed marking of IEC Mark, Class, IEC No., Mfg. Identity on each meter No embossing of ISI Mark, Class, CM/L No., Mfg. Identity on each meter
13. Available in 1Mtr. x 1Mtr. with ISI mark, Class, CM/L No.,
Mfg. Identity on each Mtr.
Available in 1Mtr. x 1Mtr. with IEC Mark, Class, IEC No.,Mfg. Identity on each Mtr. Not available in 1Mtr. x 1Mtr. with ISI Mark, Class, CM/L No., Mfg. Identity on each Mtr.
14. Tested by accredited lab Electrical Research & Development Association, Vadodara (ERDA) Tested by accredited lab as per International standard
IEC: 61111
Tested by independent laboratory.
15. Flexible & Durable to provide long use for life saver. Flexible & Durable to provide long use for life saver. Not possible due to fixed with ordinary rubber adhesive.
16. Cost effective Expensive due to import Expensive due to fix by adhesive.
17. Smooth on floor without its movement during use Smooth on floor without its movement during use Cannot say to be smooth due to fixed by rubber adhesive.
18. Eco-friendly

Bio-degradable
Eco-friendly

Bio-degradable
Non
Eco-friendly

Non
Bio-degradable
19. Ground treatment not requirement Ground treatment not requirement Ground treatment required with high cost.
20. Easy to remove and install Easy to remove and install Involves high cost and time to remove and install.
21. Storage in any atmospheric condition Storage in any atmospheric condition Rigidity increases or decreases if not stored at ambient temperature.
Send Enquiry

Send Enquiry